Starfield 2025 – Built a 2L3W1H and confirmed I can furnish it But …

starfield 情報局

Only the top and bottom doorway work, the fore, aft and side don’t seem to work completely yet. Not sure why the Hope 2.3 is problematic, same issue as before. Previously I had a ship where it wasn’t possible to force a ladder and it wouldn’t pass the shipbuilder pathway to docker and cockpit test, until it could push a hole in the roof or floor. Something seems different about this specific empty 2×3 cargo hab. Not finding what, no different key work, not finding yet why this one doesn’t want to make a fore, after, port or starboard door/window.

Can do it with the one from Hope Tech though so something somewhere I have missed noticing. Going to have to do more digging and look again, something somewhere I am missing. Fairly sure I setup all the plugs correctly, double checked, triple checked and just keep missing what is needing an adjustment. Let you know when I find it.

Edite:

Fixed it, the issue was I needed a SBS_Ship_Manufacture keyword. Blazing through and creating my own manufacture I didn’t add a snap behavior. Still didn’t; but will now that I confirmed the issue. The quick fixe was to be sure the interior section of the hab had the hopetech manufacture keyword. Now to go through the steps of adding a snap behavir for my special custom manufacture and putting that name in the keey wor snap behavior function lookup.

In short the spa didn’t know to what it was snapping and so it didn’t add a internal door. It needs the internal part of the hab to have a manufacture name keyword so it can lookup what it is supposed to do with the wall upon the conditions found.

Views:40
Taqs:#Starfield 2025